Products

If you own a Sumo, Tatsu, Ronin, Shogun, Tanto, Emperor or FX DonnyFl moderator and want to convert it to a QD. This conversion kit will allow you to do so. Compatibility: Will not work on old moderators with the flat front cap. Features: Indexed so it locks on at same position every time Made of 7075 aluminum Grey anodized Includes barrel/shroud adapter and rear cap Select the barrel thread specific to your airgun

No adapters needed, just put this in your quick disconnect coupling and you're all set. *You're purchasing one item, not all are included in the price. Made of stainless steel and available for: EDgunsVulcanWeihrauchTaipanFX WildcatKalibrgun CricketHatsan

This muzzle brake or air stripper attaches to the front of any air rifle equipped with a DonnyFL Quick Disconnect Adapter. Features: Made of aluminum 6061 T6 Black anodize Weights 2.9 oz Comes with M58 Air Stripper Insert Kit.

These adapters are for the RAW HM 1000x shrouds that are 2inches in diameter. Not compatible with the offset ones.  There are two types of shrouds out there, remove the factory short screw on suppressor.  If your shroud looks like the one in the picture below, select A65   If it looks like the shroud below then select A90. Does not have a thread protector. 

This package comes with 4 replacement felt wraps, screen and o-rings for the selected moderator model.

Please note* remove the front cap on your shroud. Measure the outer diameter of the threaded part. If close to 27mm, select this adapter. If not most likely A59 Features: Made of 6061 T6 Aluminum Matte black anodize Compatible up to 50 caliber Includes diamond knurled thread protector

Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.

If your Priest shroud sits behind the air bottle and you would like to use a larger suppressor, this extender will allow you to do so. Features: 6061 T6 aluminum Knurled cap Matte black anodize 

Customize the size of your RYU or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.

Sam Yangs are known to output some crazy power. This adapter with M18x1 threads will allow you to screw on the Emperor v3. You might have need the Extender as well if Silence is a Priority!

Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible up to .357 to .457 cal Seneca .357 uses 5/8x18 Please note* Sam Yang has two different types of barrel threads, M16x1.5 and 5/8x18. Best way to determine which threads you have is to go to a hardware store and pickup one of the bolts. If the bolt does not screw on then it must be the other size. If your barrel is too close to the fill probe you will need to get the extended adapter version. I currently do not have the short version of the 5/8x18.  

Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

Note: You have to remove the factory threads first. The factory thread has two flat sides where they can use a wrench to turn it counter clockwise to remove. Then add on my adapter. Features: Compatible with .177 and .22 6061 Aluminum T6 1/2 x 20 male threads

Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Black anodize Diamond pattern knurling for easy grip

If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. Features: 6061 Aluminum Black anodize Knurled thread protector Compatible up to .30 caliber

If you decide not to use the factory Skout moderator, use this adapter to allow you to screw on a different moderator with 1/2 x 20 threads. Features: 6061 Aluminum Black anodize Knurled thread protector Made for the .357 caliber Skout

This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts. Male foster fitting Max 4500 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long  

Features:  Made by CNC for accuracy Material is 6061 T6 Aluminum Matte black anodize Diamond pattern knurling for easy grip Compatible with .22, .25 and .30 calibers

This will be your favorite LDC. Why Sumo? Rear endcaps are swappable and available in different thread types Mono-core design to increase accuracy & limit the chances of pellet clipping No moving parts or epoxy that may become loose after 1000's of rounds Precision CNC'd by professional machinist Sand blasted and anodized for maximum durability Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No hex key or torch needed when you want to perform maintenance inside the unit. Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials. Comes pre-wrapped in felt Machined grooves on the outside for easy handling. Weight 5.6 oz Comes with protective red tube for easy transport and storage.For additional rear cap threads go here. *Note: If you see white lines on the inside of the front cap, that's ok. Those were caused by the prongs holding the pieces while anodizing. They are not pellet clippings. *Airgun use only, will not ship outside of the US *International Customers, please be aware that if you add this to your cart, there will not be an option to ship your items. If you have other items that are non-restricted, they won't show up either until you remove the restricted item from your cart. *Return Policy