ACCESSORIES

Upgrade kit for your fatboy muzzle brake. Comes with two air strippers for each size.  Note* Not compatible with the gold limited edition muzzle brakes. Features: .177/22, .22/25 and .25/30 Bronze anodize Delrin tool to install air strippers

The magazine will work on the FX Panthera and FX Dynamic Number of Shots per Caliber.22   cal - 17 shots.25   cal - 15 shots.30   cal - 13 shots

If you own a Sumo, Tatsu, Ronin, Shogun, Tanto, Emperor or FX DonnyFl moderator and want to convert it to a QD. This conversion kit will allow you to do so. Compatibility: Will not work on old moderators with the flat front cap. Features: Indexed so it locks on at same position every time Made of 7075 aluminum Grey anodized Includes barrel/shroud adapter and rear cap Select the barrel thread specific to your airgun

No adapters needed, just put this in your quick disconnect coupling and you're all set. *You're purchasing one item, not all are included in the price. Made of stainless steel and available for: EDgunsVulcanWeihrauchTaipanFX WildcatKalibrgun CricketHatsan

This muzzle brake or air stripper attaches to the front of any air rifle equipped with a DonnyFL Quick Disconnect Adapter. Features: Made of aluminum 6061 T6 Black anodize Weights 2.9 oz Comes with M58 Air Stripper Insert Kit.

This package comes with 4 replacement felt wraps, screen and o-rings for the selected moderator model.

Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.

Customize the size of your RYU or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.

This extended quick disconnect (QD) makes it easy for those guns with hard to reach fill nipples. A must have for FX Impacts. Male foster fitting Max 4500 psi (Do not exceed recommended pressure) Release collar close to 1.20 inches long  

4.3 oz, 60% Polyester 40% Cotton Tear-away, removable labels Made to fit comfortably all day long available up to 3XL 

Protective case for your DonnyFL suppressors. Made of hard cardboard with an anti-scratch outer surface. Please note, when you order a new moderator going forward. These are included.  

Look ma no more tools! You no longer need the prongs or hex key whenever you want to adjust your spring tension. Loosen the side thumb screw allowing you to adjust the HST in or out with ease. Once you're done, tighten back the side screw.  Features: CNC parts Red anodize to add character to your gun Package includes side thumb screw and HST adjuster

Look ma no tools! You don't need the prongs or hex key whenever you want to adjust your spring tension. Loosen the side thumb screw to adjust the HST in or out with ease. Once you're done, tighten back the side screw.  Features: CNC parts Has a through hole in the back in case the spring tension is too much, you can use a hex key or thin screw driver to help turn Black anodize to add character to your gun Package includes side thumb screw and HST adjuster

This piece replaces the OEM plastic air stripper. This will help in the long run as the plastic ones tend to crack. It includes o-ring. Features: 6061 Aluminum Matte black anodize Other things to consider: Gauntlet 1/2 x 20 adapter Gauntlet short shroud with 1/2 x 20 adapter **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

This shroud is 3 inches shorter than OEM. I removed the plastic baffle that came with the gun and added a 1/2 x 20 adapter. This allows you to put a bigger suppressor in the front and make this gun super quiet. I highly recommend the Tatsu. All you will hear is the hammer spring. Overall length is 23 inches. You will need the OEM spring.  Features: 23 inches overall CNC Matte black anodize Other things to consider: Gauntlet Aluminum Air Stripper Directions:1. Remove the factory shroud by turning the shroud counter clockwise2. You won't need the factory black baffle but hang on to the spring3. Remove factory air stripper by pulling it off4. Put the o'ring onto the DonnyFL air stripper5. Slide the air stripper onto the barrel6. Take the short shroud and drop the factory spring down the shroud towards the side that has the adapter7. Apply some silicone grease onto the air stripper o'ring8. Slide short shroud over the barrel, once you're at threaded part in the rear, turn clockwise to tighten.To install a suppressor, remove the thread protector from the shroud. Screw on the suppressor. ​Very important that you include the factory spring, it holds the air stripper in place. Without it, the stripper will fall off and block the exit hole. *Return Policy    **NOT COMPATIBLE WITH THE .30 CAL GAUNTLET 2

Customize the size of your Yokozuna or replace sections of your unit with these individual parts. Please note I would not add more than 2 extra baffles on top of the factory units. If you plan to do so, I would recommend going one caliber size up. *The products on DonnyFL are INTENDED for use on airguns only.  It is a violation of Federal law to use this product in a manner inconsistent with what it was intended for.for.